Procedure 5. Install The Printer (Optional) - Verathon BladderScan i10 Operation & Maintenance Manual

PROCEDURE 5. INSTALL THE PRINTER (OPTIONAL)
An optional printer is available for BladderScan i10 systems. This printer is mounted on the base of the
workstation and communicates with the console through a standard USB connection.
If your organization has purchased the printer as part of its initial BladderScan i10 system order, follow the
instructions in the BladderScan i10 Workstation Assembly Quick Start Sheet (part number 0900‑5007) to
install the printer as you assemble the workstation.
If your organization purchases a printer for an existing BladderScan i10 system, follow the instructions in
the BladderScan i10 Printer Installation Quick Start Sheet (part number 0900‑5068) to add the printer to the
workstation and install the USB cable between the console and the printer.
27
Operations & Maintenance Manual: Setting Up
0900‑5005 REV‑00