Device Repair; Troubleshooting Procedures; Procedure 1. Troubleshoot Console Battery Issues - Verathon BladderScan i10 Operation & Maintenance Manual

Hide thumbs Also See for BladderScan i10:
Table of Contents

Advertisement

DEVICE REPAIR

The system components are not user‑serviceable. Verathon does not make available any circuit diagrams,
component parts lists, descriptions, or other information that would be required for repairing the device
and related accessories. All service must be performed by a qualified technician. If you have any questions,
contact Verathon Customer Care or your local representative.
Read the

TROUBLESHOOTING PROCEDURES

PROCEDURE 1.
TROUBLESHOOT CONSOLE BATTERY ISSUES
1. If the system does not turn on, the battery may be dead or simply discharged. To determine the battery's
condition, attempt to recharge it according to the instructions in the procedure
page 25.
2. If you cannot recharge the battery but a second battery is available, remove the first battery and insert
the second battery. If necessary, charge the second battery according to the instructions in the procedure
"Charge the Battery"
3. If the system does not respond to these troubleshooting steps, contact Verathon Customer Care.
Operations & Maintenance Manual: Help & Troubleshooting
"Warnings & Cautions"
section.
on page 25, and then verify that the system operates normally.
"Charge the Battery"
on
65
0900‑5005 REV‑00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents