Installation When Using A Network Print Queue Or Share (Printer Driver Only) - Brother DCP-6690CW Network User's Manual

Installation when using a Network Print Queue or Share
(printer driver only)
Note
• You must configure the IP address on your machine before you proceed with this section. If you have not
configured the IP address, see Configuring your machine for a network with an Ethernet cable connection
on page 9 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• If you are using Windows
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions again.
a
Start the CD-ROM installation menu program according to the Quick Setup Guide.
b
Choose the model name and your language (if necessary), and then click Initial Installation or
Advanced.
c
Click Printer Driver (Only).
d
Click Next in response to the Welcome message. Follow the on-screen instructions.
e
Choose Standard Installation and click Next.
f
Choose Network Shared Printer, and then click Next.
g
Choose your printer's queue, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer on the network.
h
Click Finish.
®
Firewall or a firewall function of anti-spyware or antivirus applications,
Appendix A
A
A
151