Brother DCP-6690CW Network User's Manual page 114

Setup Mail TX
This menu has three selections: Sender Subject, Size Limit and Notification.
Sender Subject
This field displays the subject that is attached to the Internet fax data being sent from the Brother machine to
a computer (default is "Internet Fax Job").
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Sender Subject.
f
Enter the subject information.
Press OK.
g
Press Stop/Exit.
Size Limit
Some E-mail servers do not allow you to send large E-mail documents (the System Administrator will often
place a limit on the maximum E-mail size). With this function enabled, the machine will display
Out of Memory when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent
and an error report will be printed. The document you are sending should be separated into smaller
documents that will be accepted by the mail server. (For your information, a 42 page document based on the
ITU-T Test Chart #1 test chart is approximately 1 Mbyte in size.)
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Mail TX.
Press OK.
e
Press a or b to choose Size Limit.
f
Press d or c to choose On or Off.
Press OK.
g
Press Stop/Exit.
Control panel setup
6
6
6
6
104