Using The Driver Deployment Wizard Software - Brother DCP-6690CW Network User's Manual
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-6690CW:
- User manual (137 pages) ,
- Quick setup manual (43 pages) ,
- Service manual (507 pages)
Table of Contents
Advertisement
Using the Driver Deployment Wizard software
a
When you run the Wizard for the first time you will see a welcome screen. Click Next.
b
Choose MFC, and then click Next.
c
Choose your connection type to the machine that you want to print to.
d
Choose the option you require, and follow the on-screen instructions.
If you choose Brother Peer-to-Peer Network Printer, the following screen is displayed.
Setting the IP Address
If the machine does not have an IP address, the Wizard will allow you to change the IP address by
choosing the machine from the list and by choosing the Configure IP option. A dialog box then
appears which allows you to specify information such as the IP address, subnet mask and also the
gateway address.
Driver Deployment Wizard (Windows
®
only)
7
7
116
- Quick Links:
- Wired Network Connection Example
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
