Setup Misc. (Mfc-5490Cn Only); Setup Wizard (Wireless Network Only); Ses/Wps/Aoss (Wireless Network Only); Wps W/Pin Code (Wireless Network Only) - Brother DCP-6690CW Network User's Manual

Setup Misc. (MFC-5490CN only)

Ethernet
Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT
full or half duplex mode by auto negotiation.
You can fix the server link mode to 100BASE-TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BASE-T Full Duplex (10B-FD) or Half Duplex (10B-HD). This change is valid after the print server has been
reset (default is Auto).
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
a
Press Menu, 5, 2, 1.
b
Press a or b to choose Auto, 100B-FD, 100B-HD, 10B-FD or 10B-HD.
Press OK.
c
Press Stop/Exit.

Setup Wizard (wireless network only)

The Setup Wizard guides you through the wireless network configuration. For more information, see Using
the Setup Wizard from the control panel on page 27.

SES/WPS/AOSS (wireless network only)

If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup™ (PBC
AOSS™, you can configure the machine easily without a computer. Your Brother machine has the
SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode your access
point uses, SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™. By pushing a button on the wireless
LAN router / access point and the machine, you can setup the wireless network and security settings. See
the user's guide for your wireless LAN router / access point for instructions on how to access one-push mode.
(See Using the SES/WPS/AOSS control panel menu to configure your machine for a wireless network
on page 31.)
1
Push Button Configuration

WPS w/PIN code (wireless network only)

If your wireless access point supports Wi-Fi Protected Setup™ (PIN Method), you can configure the machine
easily without a computer. The PIN (Personal Identification Number) Method is one of the connection
methods developed by the Wi-Fi Alliance. By inputting a PIN which is created by an Enrollee (your machine)
to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user's guide for your wireless LAN router / access point for instructions on how to access
the Wi-Fi Protected Setup™ mode. (See Using the PIN Method of Wi-Fi Protected Setup™ on page 35.)
Control panel setup
6
6
6
6
6
1
) or
6
90