Encryption Methods - Brother DCP-6690CW Network User's Manual

Encryption methods

Encryption is used to secure the data that is sent over the wireless network. The Brother wireless machine
supports the following encryption methods:
None
No encryption method is used.
WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and
re-keying mechanism.
AES
AES (Advanced Encryption Standard) is the Wi-Fi
Network Key
There are some rules for each security method:
Open System/Shared Key with WEP
This key is a 64-bit or 128-bit value that must be entered in an ASCII or hexadecimal format.
• 64 (40) bit ASCII:
Uses 5 text characters e.g. "WSLAN" (this is case sensitive).
• 64 (40) bit hexadecimal:
Uses 10 digits of hexadecimal data e.g. "71f2234aba".
• 128 (104) bit ASCII:
Uses 13 text characters e.g. "Wirelesscomms" (this is case sensitive).
• 128 (104) bit hexadecimal:
Uses 26 digits of hexadecimal data e.g. "71f2234ab56cd709e5412aa2ba".
WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
®
authorized strong encryption standard.
3
3
3
20