For Ad-Hoc Mode - Brother DCP-6690CW Network User's Manual

Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs Also See for DCP-6690CW:
Table of Contents

Advertisement

For Ad-hoc mode

a
Confirm your network environment. (See page 23.)
Ad-hoc mode
Connected to a wireless capable computer
without an access point
b
Confirm your wireless network setup method. (See page 24.)
Using the Setup Wizard from the control panel
(Recommended)
c
Configure your machine for a wireless network. (See page 27.)
See page 27.
Installing drivers and software (See the Quick Setup Guide.)
Wireless configuration and installing drivers and software have been completed.
Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
Infrastructure mode
or
Connected to a computer with an access point
For Windows
For Macintosh
See page 21.
Using the Brother installer
application
®
(See page 50.)
®
(See page 69.)
3
3
22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-6490cwMfc-5890cnMfc-5490cn

Table of Contents