Brother DCP-6690CW Network User's Manual page 65

Wireless configuration for Windows
Note
The default Node name is "BRWxxxxxxxxxxxx" (where "xxxxxxxxxxxx" is your Ethernet address).
m
The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the machine with, and then click Next.
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the Name
(SSID) and the Channel number, and then click Next.
n
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to p.
®
using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
4
55