SMC Networks PFMC7501-L Operation Manual page 38

<Operation>
Press the UP or DOWN button in function selection mode to display [F 1].
Output mode setting
Press the UP or DOWN button to select the output mode.
: When the accumulated pulse output is selected, the output display (Indicator LED) will turn off.
Press the SET button to set.
Setting of switch operation
Press the UP or DOWN button to select the switch operation.
: By switching the output, the display colour will change in relation to the setting.
Press the SET button to set.
Input of set values
a, When hysteresis output mode is selected
The sub screen (right side) displays the set value.
Change it with the UP and DOWN buttons.
(When reversed output is selected, the sub screen (left side) displays [n_1].)
Press the SET button to set.
Press the SET button.
-37-
Move on to output mode setting.
Move on to the setting of switch operation.
Move on to the input of set values.
Move on to the setting of hysteresis.
No.PF※※-OMY0002