■[F98] Setting of output check
The operation of the output can be checked by switching the output ON/OFF by pressing a button, without
the need for a flow of fluid.
<Operation>
Press the UP or DOWN button in function selection mode to display [F98].
Select of output check
Press the UP or DOWN button to select all function setting.
[n] (Normal output) is
selected.
Press the SET button to
set.
Return to function
selection mode.
Press the SET button.
[F] (Forced output) is selected.
Press the SET button to set.
Output check of OUT1
Press the UP or DOWN button to select output
check of OUT1.
[F] (Forced output) is selected.
Press the SET button to set.
Output check of OUT2
Press the UP or DOWN button to select output
check of OUT2.
アナログ出力付製品の場合
Press the SET button to set.
-64-
Move on to select of output check.
Move on to output check of OUT1.
Move on to output check of OUT2.
Move on to analogue output check.
No.PF※※-OMY0002