SMC Networks PFMC7501-L Operation Manual page 67

: Measurement mode can return from any setting item by pressing the SET button for 2 seconds or longer.
: An increase or decrease in flow will have no effect on the output while the output operation is being performed.
: PD stands for Process data. Refer to page
PD diagnostic bit (error) check
Press the UP or DOWN button
to select diagnostic bit (error)
check.
: This function is available with IO-Link communication.
: Refer to page
Press the SET button to set.
PD flow measurement check
Press the UP or DOWN button
to select PD flow
measurement check.
: This function is available with IO-Link communication.
Press the SET button to set.
[F98] Setting of output check completed.
73 for further details of the PD.
-66-
78 for details of the diagnostic information.
Move on to PD diagnostic
bit (flow) check.
Return to function
selection mode.
No.PF※※-OMY0002