SMC Networks PFMC7501-L Operation Manual page 66

Analogue output check
Press the UP or DOWN button to select analogue
output check.
: When 0-10V is selected for voltage output type, [ 0.0]  [ 10.0] is displayed.
: For current output type, [ 4]  [ 20] is displayed.
When the product is used in
SIO mode
Press the SET button to set.
Move on to function
selection mode.
PD diagnostic bit (flow) check
Press the UP or DOWN button
to select diagnostic bit (flow)
check.
: This function is available with IO-Link communication.
: Refer to page
Press the SET button to set.
-65-
When the product is used in
SDCI mode (IO-Link)
Press the SET button to set.
Move on to the PD
diagnostic bit check.
78 for details of the diagnostic information.
Move on to PD diagnostic
bit (flow) check.
No.PF※※-OMY0002