SMC Networks PFMC7501-L Operation Manual page 55

•Display of accumulated value
The power display (Value×10
The sub screen always displays power.
When the DOWN button is pressed for 1 second on the accumulated value display screen, the display will
be switched alternately.
Power display: The effective upper 4 digits of the accumulated measurement value are displayed.
The dot (decimal point) and units display indicator (×10
the digits.
Alternate display: The accumulated flow measurement value is displayed in two parts, upper digits (7th to
10th digit) and lower digits (1st to 6th digit).
The values are displayed with the lower digits until it exceeds the 6th digit.
When the value exceeds the 6th digit, "Upper digits (3 seconds)  lower digits (3
seconds)" will be displayed alternately.
: Accumulated value display example (in case of 500 L range)
Accumulated
Power value is
value
120 L
123,450 L
123,456,780 L
9,999,999,999 L
(maximum
accumulated
flow value
exceeded)
Nth
power) and upper digit - lower digit are displayed alternately.
displayed
3 /×10
Alternate display
Upper digits
No display
(only lower digits are
displayed).
No display
(only lower digits are
displayed).
-54-
6 ) light up due to carrying of
Lower digits
No.PF※※-OMY0002