Figure 23: Ml With Copper Connection Down - Allied Telesis DMC1000/100 Series Installation Manual

Chapter 1: Overview
Figure 23 shows media converter and its LINK/ACT LED behavior in the
ML mode when a copper connection is down.
When a copper connection to the media converter fails, the copper
LINK/ACT LED is turned off. The fiber port LINK/ACT LED blinks slowly
and the fiber link goes down.
AT-DMC1000
End Node End Node
Copper Cable Fiber Cable
Copper Fiber
LINK/ACT LINK/ACT
Link LED Off Link LED Off
Link Down Link Down
LED LED
Off Blinking
Figure 23. ML with Copper Connection Down
32