Table of Contents
Advertisement
Chapter 2: Installation
Selecting a Site for the Media Converter
38
Observe the following requirements when choosing a site for your media
converter:
If you are installing the media converter on a table, verify that the
table is level and secure.
The power outlet for the media converter should be located near
the unit and should be easily accessible.
The site should provide for easy access to the ports on the media
converter. This will make it easier for you to connect and
disconnect cables, as well as view the media converter's LEDs.
Air flow around the unit and through its vents on the side should
not be restricted so that the media converter can maintain
adequate cooling.
Do not place objects on top of the media converter.
Do not expose the media converter to moisture or water.
You should use dedicated power circuits or power conditioners to
supply reliable electrical power to the network devices.
Advertisement
Table of Contents
