Table of Contents
Advertisement
Chapter 2: Installation
50
OR
Attach the other end of the USB cable to the USB port on the
power adapter, then plug the power adapter to a power outlet, as
shown in Figure 34. See "Power Specifications" on page 58 for
power requirements.
Figure 34. Connecting Power via Power Adapter
4. Verify that the SYS LED is lit green. If the SYS LED is off, see
"Troubleshooting" on page 53.
5. Remove the dust cover from the fiber-optic connector(s) and connect
the cable to the fiber-optic port as shown in Figure 35 on page 51.
Advertisement
Table of Contents
