Table of Contents
Advertisement
MAX
OFF
Filling water
1
Slide out the water tank from the casing.
2
Open the filling cap and fill with tap water.
3
Close the filling cap and push the water tank back
to the original position.
Do not fill the tank without the filter in place.
Do not forget to put back the filling cap properly after
refilling.
Do not put perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the water
tank.
Setting the spray
1
By adjusting the spray control, the amount of spray
is regulated according to the fabric type.
-
Dry; synthetic fabrics, silk.
-
Moist; cotton, linen, cotton blends, wool.
2
To get the required amount of spray for easy
removal of creases, adjust the spray control towards
the 'MAX' position. Full amount of spray can be
obtained with spray control adjusted to the far-end of
the 'MAX' position.
3
For dry ironing, spray can be turned off completely
by adjusting the spray control to the far end of the
'OFF' position.
4
Spray can be adjusted anytime during ironing.
►Note: When the appliance is new or after extended
period of storage, the spray needs to be primed for
first use. Priming is to fill up the internal tubing with
water before the spray can start to function properly.
To do this:
1
Fill the water tank.
2
Adjust the spray control to 'OFF' position.
ENGLISH
7
Advertisement
Table of Contents
