System Information; System Update - Strong SRT 5005 User Manual

9.3.4 System Information

Display the software version information.
Press OK/EXIT keys to return.

9.3.5 System Update

In this menu, you can select between "STB to STB" and "OAD".
9.3.5.1 Update through STB to STB
The System Update screen will appear.
When it is necessary to update the System, please follow these steps:
a) First power off both STBs, connect them with cross RS 232.
b) Then power on master STB (master is STB from which you will copy software) and keep
slave STB off. Navigate in the menu of master STB and select "System Update – STB to STB".
c) When the status displays "detecting slave STB", power on slave STB, after the master
STB detects the slave, the master starts transmission and burns.
d) While transmitting and burning, it is very important to avoid other operations such as
power off because this may cause destruction of the data in the FLASH memory and
the receiver will need to be repaired.
e) When update complete, please first power off both STBs, then disconnect the RS 232 line.
The system updates just update the software and the programsdatabase are not be updated.
Tips
26
SCREEN 34
SCREEN 35
PART 1 English