Interfaces
Switch 2
Switch 1
Open
Open
Open
Closed
Closed
Open
Closed
Closed
Serial downloader mode allows the system to boot from USB, which is ideal for recovery purposes,
such as if the boot loader is erased or cannot boot.
For more information about the boot mode configuration, see the
Hardware Reference
Power and reset buttons
The power button (SW1) on the ConnectCore 8X SBC Express is connected to the on-module MCA,
which provides the following functionality:
Board status Power button action
OFF
Short press
ON or SLEEP
Long press for 5 seconds Power off
SLEEP
Short press
ON
Short press
ConnectCore® 8X SBC Express Hardware Reference Manual -- Preliminary
Boot mode
eMMC
Fuses
microSD
Serial downloader
Manual.
Response
Power on
Wake up
Sleep
Power and reset buttons
ConnectCore 8X System-on-Module
11