Digi ConnectCore 8X Hardware Reference Manual page 15

Interfaces
Schematic signal
Pin name
16 MIPI_DSI0_PWM0_
OUT
17 MIPI_DSI0_I2C0_SCL
18 MIPI_DSI0_I2C0_SDA
19 MIPI_DSI0_IRQ_N
20 VIN
MIPI-DSI
The MIPI-DSI interface is available over a 15-pin, 1 mm pitch, FCC connector, which provides access to
the following MIPI capabilities:
Two MIPI-DSI differential data pairs.
n
One MIPI-DSI differential clock pair.
n
I2C, shared with the LVDS connector.
n
3.3V power supply.
n
The following table describes the pinout of the MIPI-DSI connector:
Pin Schematic signal name
1 3V3_EXT
2 3V3_EXT
3 GND
4 MIPI_DSI0_I2C0_SDA
5 MIPI_DSI0_I2C0_SCL
6 GND
7 MIPI_DSI0_DATA0_P
8 MIPI_DSI0_DATA0_N
9 GND
10 MIPI_DSI0_CLK_P
11 MIPI_DSI0_CLK_N
12 GND
13 MIPI_DSI0_DATA1_P
14 MIPI_DSI0_DATA1_N
15 GND
ConnectCore® 8X SBC Express Hardware Reference Manual -- Preliminary
Description
Backlight PWM, connected to MIPI_DSI0_GPIO0_00 ConnectCore 8X
pad
I2C bus clock line
I2C bus data line
Interrupt line, connected to ConnectCore 8X GPIO4_19
Output 5V power supply line
Description
Output 3.3V power supply line
Output 3.3V power supply line
I2C bus data line
I2C bus clock line
Transmission pair 0 data line (+)
Transmission pair 0 data line (-)
Transmission pair clock line (+)
Transmission pair clock line (-)
Transmission pair 1 data line (+)
Transmission pair 1 data line (-)
LVDS/MIPI-DSI display
15