Transport Position - horsch Taro 6 HD Operating Instructions Manual

6.1.2 Transport position

60029922 • 1 • 09/2020 • en
4. Lock the tractor link arms against swinging sideways.
5. Connect the hydraulic lines.
6. Connect the lighting system.
7. Plug on the hose assembly from the front implement and tighten the hose
clamps.
8. Check before starting to drive whether the machine has been properly connec-
ted and secured.
WARNING
Danger of traffic accidents
Before driving off:
Ø Clean all picked up soil from the entire machine.
Ø Check function of lighting system.
Ø Lock the control units mechanically or electrically, depending on the version,
during transport travel. Never switch them to the floating position.
Ø Check all interlocks before starting to drive.
Ø Check whether all securing elements of the connection are in place as set cor-
rectly.
Ø Check components of the connection for wear.
Ø Make sure that the transport height lies below the maximum permissible
transport height; adjust the transport height if necessary
NOTE
Ø Make sure before driving on public roads that the machine meets all respect-
ive applicable national road traffic regulations.
Make the following additional adjustments before road transport:
1. Lift the machine.
2. Fold in the machine completely, see section Folding in.
3. Switch off the drill controls.
Operation | 6
35