Parking - horsch Taro 6 HD Operating Instructions Manual

6 | Operation
Position of control units
during road travel

6.1.3 Parking

36
Control unit
Unfolding / Folding in
Bout marker
Crossbar
DANGER
Serious accidents from loss of stability!
Ø Park the machine only on a level and firm ground.
Ø Secure the machine against rolling away before unhitching.
Ø Always park the machine while unfolded.
NOTE
Ø Clean the machine and prepare properly before parking it for an extended
period; see chapter Care and Maintenance.
Ø Thoroughly clean hopper and fertiliser equipment. Fertiliser is aggressive and
speeds up the corrosion process. It especially attacks galvanised components
like bolts.
Ø Clean all metering units.
Ø Preferably park the drill in a shed so that no moisture can accumulate in hop-
per, metering units and the seed hoses.
1. Position the machine at a suitable location and secure it with wheel chocks
against rolling away.
2. Lower the machine on the coulter and packer.
3. Lock the control units.
Position Floating posi-
tion
Locked posi- Supply
tion
60029922 • 1 • 09/2020 • en