Table of Contents
Advertisement
2.3.1 Groups of operators
Instructed operators
Operator trained by
HORSCH
60029922 • 1 • 09/2020 • en
2.3 Qualification of personnel
Unintended use of the machine can lead to severe or even fatal physical injuries. In
order to prevent accidents, each person involved in work with the machine must
meet the following general minimum requirements:
Ø The person must be physically able to keep the machine under control.
Ø The person is able to perform work with the machine safely within the scope
of these operating instructions.
Ø The person is acquainted with the function of the machine within the scope of
its work and is able to assess and avoid any work related dangers. The person
is able to recognize and avoid work-related dangers.
Ø The person has understood the operating instructions and is able to implement
the information given in the operating instructions accordingly.
Ø The person is fully familiar with the safe operation of the vehicle.
Ø The person knows all applicable road traffic regulations and is in possession of
a valid driving permit for road travel.
Ø A person being instructed must only work with or on the machine under the
supervision of an experienced person.
The owner of the machine must
• Regulate the area of responsibility, competence and monitoring of personnel.
• Train and instruct the personnel.
• Make the operating instructions accessible for the operator.
• Ensure that the operator has read and understood the operating instructions.
Persons who work with the machine must have been trained for the different activit-
ies involved.
These persons must have been trained for their respective activities by the owner or
other qualified experts.
This refers to the following activities:
• Road transportation
• Application and set-up work
• Operation
• Maintenance
• Troubleshooting and repair
Furthermore, for certain activities the corresponding personnel must have been
trained by service personnel from HORSCH.
This refers to the following activities:
• Loading and transport
• Commissioning
• Troubleshooting and repair
Safety and responsibility | 2
11
Advertisement
Table of Contents
