Removing Voke; Removing Armature - Kubota D1102-B Workshop Manual

Q

Removing Voke

1) ) Draw out the yoke from the d rive end frame.
(Note for reassembling)
• Take care for yoke knock pin.
0

Removing Armature

1) Rem ove the set bol t from the d ri ve lever.
2) Draw out the a rmatu re from the d ri ve end frame.
3) Detach the d rive l eve r.
(Important)
• When reassembling, be sure not to mistake the installing
direction of the drive lever.
C0:!2F07-t
89
KiSC issued 09, 2007 A