Checking Radial Clearance Between Oil Pump Outer Rotor And Body; Checking End Clearance Between Rotor And Cover; Checking And Replacing Oil Filter - Kubota D1102-B Workshop Manual

C
Ol 9 F049
C019 F050
(2) Checking Radial Clearance between Oil
Pump Outer Rotor and Body
1) I nsert a feeler gauge i nto the gap between the body and
the ou ter rotor.
I f the measu rement exceeds the al l owa ble l im i t, replace.
2)
(3) Checking End Clearance between Rotor
and Cover
Paste a press gauge wi th grease on the su rface of the gear.
1)
Attach the cover.
2)
3) Detach the cover caref u l l y, and measu re the depression
of the press gauge wi th a sheet of gau ge ( pa per) .
I f the measu rement exceeds the al lowa ble l im it, replace.
4)
(D

Checking and Replacing Oil Filter

Detach the f i l ter wi th
1)
Repl ace the oi l f i l ter cartridge.
2)
( Note for reassembling)
a
• Apply thin coat of oil to packi ng and tighten it securely
by hand.
61
a
f i l ter wrench .
KiSC issued 09, 2007 A