Removing Injection Pump Cover; Removing Injection Pump - Kubota D1102-B Workshop Manual

0

Removing Injection Pump Cover

1) Remove the injection pump cover.
0

Removing Injection Pump

1) Line up the control rack pin to the slot on the crank
case. Remove the injection pump.
2) Remove the injection pump shims. Take down the
number of the shims for reference.
( I m portant)
• When reassembl ing, i nsert the pump rack pin i nto the fork
lever 1 slot surely.
(1) Slot of fork lever 1
(2) Insert surely
38
KiSC issued 09, 2007 A