Table of Contents
Advertisement
Network Settings
User can select wired BACnet / Modbus / ZigBee wireless protocol (when ZigBee feature is available).
Upgrade of ZigBee 2.4 to 3.0
Upgrading ZigBee 2.4 to 3.0 will not support the SEDCO2G5045 sensor. It will therefore need to be recommissioned.
There is also a new "Security Levels" parameter for the ZigBee network (see page 21):
• Low (default value) is fully backwards compatible with ZigBee Home Automation 1.2 devices, and therefore compatible with all of the sen-
sors.
• Normal (needs to be selected by user) is only compatible with ZigBee 3.0.
Figure 9: Network Settings Display.
O n b o a rd p ro t .
O p t i o n a l p r o t .
Wi re d p ro t oc o l
Table 2: Network Settings Parameter Details.
Configuration Parameters Default Value
Onboard Protocol
Read Only
Optional Protocol
Read Only
Wired Protocol
Default Value: BACnet
N e t w o rk
No n e
BAC. IP
Non e
Onboard ZigBee detection
Display Readings: None, ZigBee
Requires onboard ZigBee module or optional Wi-Fi module (VCM8002V504).
ZigBee: ZigBee detected
IP: Wi-Fi module detected
BAC. IP: Wi-Fi module detected and BACnet/IP enabled
Display Readings: ZigBee, IP or BAC. IP
None: No wired protocol configured
BAC MSTP: BACnet MS/TP network protocol
Modbus: Modbus network protocol
Choices: None, BACnet or Modbus
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
NETWORK SCREENS
Onboard ZigBee Detection (Read Only)
Type of Expansion Module: None, ZigBee,
IP or BAC. IP (Read Only)
Wired Protocol (BACnet MS/TP or Modbus)
Significance and Adjustments
Network Settings
19
Advertisement
Table of Contents
