Table of Contents
Advertisement
WIRELESS SCREENS
Ecosystem Settings
Ecosystem Settings
The Ecosystem Settings screens show the network status, the number of paired devices as well as information for each paired device. A
maximum of twenty (20) ZigBee wireless devices can be paired to each Room Controller. Tap forward arrow to obtain information on each
paired ZigBee device.
Figure 58: Ecosystem Settings Display.
Ecosystem Settings
6/7 Configuration
Language
Network status
Units
Permit join
Permit timeout
Low backlight
Paired devices
Night backlight
RH display
Table 44: Ecosystem Settings Parameter Details.
Configuration Parameters Default Value
Network Status (ZigBee Network Status)
Default Value: Not det.
Read Only
Permit Join
Default Value: Off
Permit Timeout (Permit Join Timeout)
Default Value: 0
Read Only
Paired Devices (Paired ZigBee Devices)
Default Value: 0
Read Only
72
Not det.
English
Off
°C
0 min
60 %
0
5 %
Disable
Shows current status of ZigBee network.
Pwr on: ZigBee module detected but not configured.
No NWK: ZigBee configured but no network joined.
Joined: ZigBee network joined.
Online: Communicating.
Display Readings: Pwr on, No NWK, Joined and Online.
Setting to "On" allows the Room Controller to pair with a ZigBee device. Value must be set
to "On" to pair with initial device and then set to "Off" if user wants to prevent additional
ZigBee devices from joining the network. Changing this value to "Off" on the Coordinator
prevents any new ZigBee devices from joining the network.
Permit join can be On/Off when the Room Controller is a coordinator, however the parameter
is read only when the Room Controller is a router. Permit join stays On for three (3) hours.
On: Allows Room Controller to pair with wireless ZigBee device.
Off: Prevents Room Controller from pairing with wireless ZigBee device, or prevent any ad-
ditional ZigBee devices from joining network.
Choices: On or Off.
Allows devices to join the Coordinator Controller for 180 minutes from the moment it is set
to ON. Once the timer elapses, no devices will be able to join the network.
Permit Join parameter must be set to "On" to enable this feature.
Range: 0 or 180 minutes
Shows the number of ZigBee wireless devices currently paired with the Room Controller. A
maximum of twenty (20) ZigBee wireless devices can be paired with each Room Controller
(total of twenty (20) paired devices per Room Controller).
Display Readings: 0 to 20 devices.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Significance and Adjustments
Advertisement
Table of Contents
