Table of Contents
Advertisement
Table 4: ZigBee Network 1 / 2 Parameter Details, continued.
Configuration Parameters
Default Value
Changing between ZigBee Security levels does not require re-creating the ZigBee network, or re-commissioning sensors.
Low: Disables new security features in ZigBee 3.0 to be fully backwards compatible with ZigBee Home Automa-
tion 1.2 devices, and therefore compatible with all of our sensors.
Security Default Value
Normal: Enables the typical new features of ZigBee 3.0. This means that legacy ZigBee Home Automation 1.x
(Security Levels): Low
devices cannot join a Normal security network. Compatible with the SEDC02G5045 sensor.
Selecting the Normal Security option will result in the removal of legacy sensors from the network.
Choices: Low or Normal.
Shows the current status of the ZigBee network.
No NWK: ZigBee configured but no network joined
Network Status (ZigBee
Network Status) Read
Joined: ZigBee network joined
Only
Online: Communicating (Exchanging data)
Display Readings: No NWK, Joined, Online
Changing this value to "Off" on the Coordinator prevents any new ZigBee devices from joining the network.
Permit Join
Permit join can be On/Off when the Controller is a Coordinator, however the parameter is read only when the
Default Value: On
Controller is a router. If not set to off manually the Permit join will stay On for three (3) hours.
Choices: On or Off
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
NETWORK SCREENS
ZigBee Network 1 / 2 continued
Significance and Adjustments
21
Advertisement
Table of Contents
