Table of Contents
Advertisement
CUSTOMIZED SCREENS
Setpoint Adjustment / Other Functions
Setpoint Adjustment
During occupied setpoint adjustment, large digits are temporarily used to display the occupied setpoint. Use the up and down arrows to
select the setpoint. Normal temperature display resumes after the adjustment and the new value is displayed in the setpoint bar.
Figure 5: Setpoint Function Displays.
2019.08.19
12:54 PM
Setpoint °F
Other Functions
Local humidity shows when RH display is enabled on the setup display screen, from either the internal onboard sensor or a wireless sensor
end device selected by the RH sensor parameter on the setup configuration screen.
CO
shows when CO
display is enabled on the setup display screen, from either the optional CO
2
2
sor end device selected by the CO
Outdoor temperature shows when receiving a valid networked outdoor temperature value or a temperature sensor connected to UI23.
Figure 6: Other Function Displays.
2019.08.19
12:54 PM
Indoor °F
16
Automatic Heating / Cooling Mode
source parameter on the setup configuration screen.
2
2019.08.19
12:54 PM
Indoor °F
CO2
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
detection sensor module or a wireless sen-
2
2019.08.19
12:54 PM
Setpoint °F
Advertisement
Table of Contents
