Table of Contents
Advertisement
CONFIGURATION SCREENS
Configuration 3 / 9
Configuration 3 / 9
Figure 24: Configuration 3 / 9 Display.
3/9 Configuration
Reheat config.
Duct heater
Float. heat time
OAT duct lock
Baseboard
OAT base lock
Table 16: Configuration 3 / 9 Parameter Details.
Configuration Parameters Default Value
Reheat Config. (Reheat Configuration)
Default Value: None
Duct Heater (Duct Heater Control)
Default Value: On/Off
Float. Heat Time (Floating Heat Time)
Default Value: 1.5 min
OAT Duct Lock)
Default Value: 60.0°F (15.5°C)
Baseboard (Baseboard Control)
Default Value: Relay
OAT Base Lock
Default Value: 60.0°F (15.5°C)
34
Duct.+base
Floating
1.5
83.0 °F
Relay
30.5 °F
Reheat configuration for the zone, using the duct, baseboard or both.
Choices: None, Duct only, Base only, Duct+base, Base+duct.
Displayed when Duct only, Duct+base or Base+duct is selected.
Floating is available when Fan type is not Par./Ser. ECM.
Choices: On/Off, PWM Vac, Valve NC, Valve NO, 0-10V DA, 0-10V RA, 2-10V DA, 2-10V
RA, Floating.
Displayed when Floating Duct heater is selected.
Range: 0.5 min to 9.0 min, using 0.5 min increments.
Outside air temperature above which duct reheat will be disabled.
Displayed when Duct only, Duct+base or Base+duct is selected.
Range: 30.0°F (-1.0°C) to 90.0°F (32.0°C) using 0.5°F (0.5°C) increments.
Output type used for baseboard control.
Displayed when Base only, Duct+base or Base+duct is selected.
Choices: Relay, PWM Vac, Valve NC, Valve NO.
Outside air temperature above which baseboard reheat will be disabled.
Displayed when Base only, Duct+base or Base+duct is selected.
Range: 30.0°F (-1.0°C) to 90.0°F (32.0°C) using 0.5°F (0.5°C) increments.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Significance and Adjustments
Advertisement
Table of Contents
