Data - Lennox Core Unit Controller Setup Manual

Table of Contents

Advertisement

9.2.

Data

9.2.1. Alarm History
The unitary controller will produce active and past alarm codes. As such, the mobile application will show all active alarm
codes, and a limited history of formerly-active alarm codes, based upon the storage capacity of the unitary controller. The
CORE Service application will:
Display alarm information received from the unitary controller.
Display action alerts. Alarms will be displayed in chronological order from most recent to last recent.
Display other alarm information such as time of occurrence, and troubleshooting information.
Indicate all alarm information per the active alarm requirements.
Indicate the number of occurrences of an alarm in the past thirty (30) days.
See "Table 11. CORE Control System Alarm and Event Codes" on page 37 for alarm details.
9.2.2. Data Trending
'Trended data within the CORE controller is stored internally for up to two weeks and available in a user friendly format at X
interval for help in troubleshooting previous operation with granular historical data.'
The main purpose of this feature is for troubleshooting a unit. Having granular, time-sensitive information is critical for this
purpose. This is why having at least 5 minute intervals is set.
ALARM HISTORY
Figure 19. Alarm Menu Structure
TEMPERATURE
HEATING STAGE
DATA TRENDING
RELATIVE HUMIDITY
IAQ
Figure 20. Data Trending Menu Structure
VIEW AND CLEAR
ALARMS
SHARE DATA
18

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Core Unit Controller and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF