9.3.2. Report
This section provides service reports, system logs, system profile and user profile. All logs and reports and either be
downloaded to the via the W4
•
Service reports - These reports are saved to the root directory of the USB storage device. In addition you can save the
report to the mobile device being used and either text or email.
•
System Logs - These logs are saved to the root directory of the USB storage device. In addition you can save the report
to the mobile device being used or either e-mailed or use the device's share feature. There is also an option for data
analytic uploads as well.
•
System and User Profile - The profile is saved to the root directory of the USB storage device. In addition you can save
the report to the mobile device being used or e-mailed. There is also the option in this section to load a system profile
from USB as well.
9.3.3. Advanced Control
The interface will allow for the ability to remote reset the controller.
•
The interface shall present a confirmation dialog to the user before proceeding with the reset command
•
The interface shall indicate to the user that re-pairing will be necessary following the reboot (assuming this is necessary)
The component test functionality includes a support a "ClearDelays" functionality.
The clear delays functionality will clear timers in the CORE Control System.
The interface supports a "clear lockouts".
Features are:
•
Remote Reset
•
Clear Delays
•
Controller Lockout - Locked or unlocked.
REPORT
SERVICE
REPORT
SYSTEM
LOGS
SYSTEM
PROFILE
USER
PROFILE
Figure 25. Report Menu Structure
REPORT NAME
FILE NAME
MOBILE
SAVE
SHARE
USB
SAVE
SHARE
USB STORAGE
REPORT NAME
FILE NAME
MOBILE
SAVE
SHARE
USB
SAVE
SHARE
SAVE USER PROFILE
LOAD USER PROFILE
23
Need help?
Do you have a question about the Core Unit Controller and is the answer not in the manual?