Lennox Core Unit Controller Setup Manual page 27

RTU
OPTIONS
9.4.2. Install
The mobile application provides a menu to run "New Unit Setup".
• New Unit setup if chosen shall direct the user towards the install menu.
• The mobile application shall provide a menu to run "Install New M4" (CORE Unit Controller).
• Install new CORE Unit Controller will first confirm with the user if it is okay to "Clear all Configuration".
• If the user confirms that it is okay to "Clear All Configuration", the app shall ask the user if they are sure.
• If the user confirms, the menu directs the user towards the Setup >RTU Menu > INSTALL.
• If the user cancels at any point, they shall be taken back to the Setup >RTU Menu > INSTALL.
BLOWER ON
POWER
EXHAUST
EXTERNAL ENABLE
OCCUPIED
ALWAYS
EDIT
SEARCH
PARAMETER
VAV
AIRFLOW
MISCELLANEOUS
HEATING
COOLING
ECONOMIZER
CONTROL OPTIONS
Figure 29. Settings - Power Exhaust and Edit Parameter
INSTALL
NEW UNIT SETUP
SELECT
INSTALL
OPTION
INSTALL NEW M4
Figure 30. Settings - Install
SET POWER EXHAUST
SET POWER EXHAUST
ECONOMIZER TRAVEL
BUILDING PRESSURE
SETPOINTS
PERFORM A MANUAL SEARCH FOR A SPECIFIC PARAMETER (NOTE: NOT ALL
PARAMETERS CAN BE ACCESS THROUGH THE EDIT PARMETER TOOL)
RTU NAME
DATE AND MODEL NUMBER
TIME SERIAL NUMBER
CATALOG NUMBER
YES OR CANCEL CONFIRM AGAIN
27
SET DAMPER FRESH AIR
TEMPERING SETPOINTS
SUMMARY
CONFIGURATION ID 1
CONFIGURATION ID 2
SEE FIGURE 9 FOR ADDITIONAL
INSTALL SETTING.