Table of Contents
Advertisement
Once the "fourth" digit has been entered, when
pressing button (4) the instrument panel activates the
following indications:
-
Back
-
Memory (orange)
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4). To memorise the entered code, highlight the
"Memory" indication (orange) and press button (4).
Then, the instrument panel will activate the
"Memorised" indication (green) for 2 seconds.
At the end of the 2 seconds, the instrument panel
goes back to the previous screen with the indication
"Modify Pin" (instead of "New Pin") (ref. page 156):
in fact, after memorising the first PIN CODE, the page
of the menu where to enter the "New Pin" is no
longer available and is replaced by the page to modify
the PIN CODE.
Note
The page for entering the PIN CODE is active
and available again only in case the Pin Code function
is reset (but this is only possible through the DUCATI
diagnosis instrument).
154
Back
Memory
6 6 6 6
...
Memorised
...
1
2
4
Fig. 84
Fig. 85
Advertisement
Table of Contents
