Cruise Control - Ducati MULTISTRADA 1260S Owner's Manual

Cruise Control

Multistrada is equipped with a system for maintaining
the cruise speed: Ducati Cruise Control.
This function displays Cruise Control status and
"target" speed.
When Cruise Control is activated by pressing ON/OFF
button (5), the instrument panel will turn on the Cruise
Control warning light (3, Fig. 7). When the system is
on, the Cruise Control icon on the instrument panel
turns on.
In these conditions, the Ducati Cruise Control is ready
to be set with the target speed to be maintained
automatically, with no need to hold the throttle
twistgrip in position.
When SET button (7) is pressed, current speed is set
as target cruise speed.
To confirm correct setting of cruise speed, the target
speed indication is activated on the instrument panel
for 5 seconds then followed by the "Set" icon.
It is possible to increase or decrease set cruise speed,
by pressing buttons (6) and (7), respectively.
Every "click" corresponds to a speed increase or
decrease of 1 Km/h (1 mph).
The new set target speed is displayed in place of the
SET icon when system is reaching said speed.
5
4
10:22
SET P.M.
3
60
2
1
Km/h
LAP
2538
TOT
MENU
SETTING
260
RANGE
Km
CONS
13.5
Km/l SPORT
AVG1
When the new requested target speed has been
reached for over 5 seconds, the SET icon is displayed
again.
Press RES button (6) to resume previous SET speed,
in case the Ducati Cruise Control was previously
disabled.
Important
In case of a long DTC (Traction Control) event,
the Cruise Control will automatically turn off.
5
RPM x 1000
2
GEAR
Km
DQS
UP/DW
°C
LO DTC 5
ABS 3
DWC 3
Fig. 160
6
7
215