Thermostat Display Overview - Siemens RDS110.R User Manual

4
Getting started with your thermostat

Thermostat display overview

4.2 Thermostat display overview
Normal display
14 | 59
1 Tap to display detailed information and additional settings.
2 Tap to display additional measurements, for example, outside air
temperature. (Only if external sensor is connected)
3 Tap to display notifications (only visible if any)
4 Room temperature
5 Tap to toggle between "At home" and "AWAY".
6 Displays whether the thermostat is following a schedule (
your setpoint changes permanently (
the following:
●
If there is a network connection and you've also set your schedule, the
thermostat follows your schedule. Your temporary change of the
temperature setpoint only takes effect during the currently scheduled
mode.
●
If the network is connected but no schedule set, the thermostat applies
the system's default schedule. For more information on the default
schedule, see Time-based schedules [➙ 49].
●
Without network connection or valid time, the thermostat cannot retrieve
schedule information from the Cloud. It always works in the "Comfort"
mode.
7 Tap or slide to change the room temperature setpoint. *
The thermostat is in heating mode – at some point, the relay will be
energized, depending on the heating demand and application type.
The thermostat is not in heating mode.
NOTICE! * There is a few seconds' delay between the color change in the
temperature bar and the reaction of the relays.
) or following
). Following a schedule can mean
A6V11562455_en--_b