Changing System Setup - Siemens RDS110.R User Manual

6.8.3 Changing system setup

Changing basic
configurations
A6V11562455_en--_b
No. Application Descriptions
settings
To manage application settings
1. On the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap > , and then scroll to the specific setting that you want to turn on/off or
change to a desired Value.
4. Tap to change the setting as desired.
If you want to change any of your initial setup options that you've already
configured during the setup wizard, you can change them later under "Advanced
Settings". You can also change some other default system setup options to suit
your own needs. However, we recommend that only installers or experts with
detailed know-how about your thermostat modify the setup options.
See the Quick guide for guidance to the setup wizard.
Changing basic configurations of the thermostat allows you to change the
equipment type that your thermostat is working together with. The equipment could
be one of the following:
●
Gas boiler
●
Radiator with valve
●
Radiator with pump
●
Electric floor heating
●
Fan with electric heating
●
Floor heating with valve
●
Floor heating with pump
●
Electric radiator
●
Electric boiler
●
Generic heating device
If the selected equipment is related to a pump or valve, you can decide whether to
run the pump or valve periodically.
NOTICE
When selecting the gas boiler application, ensure a hydronic heating is used. The
RDS110.R is not calibrated for use in combination with a gas-fired ducted heating
system.
Operating the thermostat on the device
Factory Range
settings
, then tap and .
6
Advanced settings
Dependencies
[➙ 35] and
selected
"Warm-up
gradient" for
Application
setting No.38
35 | 59