5
Connecting to wireless devices
Connecting to Smart Thermostat receivers
5.2 Connecting to Smart Thermostat receivers
18 | 59
The thermostat can connect to a maximum of six Smart Thermostat receivers
(RCR114.1 as a relay) to control the following heating equipment:
●
Gas boiler
●
Radiator with pump
●
Electric floor heating
●
Fan with electric heating
●
Floor heating with valve
●
Floor heating with pump
●
Electric radiator
●
Electric boiler
●
Generic heating device
See Changing system setup [➙ 35] for more information about heating
equipment.
To initiate the connection with RCR114.1 Smart Thermostat
Receiver
1. On the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap
> , and then tap "Pair new devices".
4. On RCR114.1, press the
5. Perform the above action on all receivers if you have more than one RCR114.1
on hand.
On RCR114.1, the LED flashes green during connection establishment and
turns to green when it succeeds. If the connection fails, the LED is solid
yellow. Try to connect again.
The thermostat displays information about successful pairing.
6. Tap "Done" on the thermostat. All the added devices are displayed on the
"Devices" page.
, then tap and .
button. The LED flashes green.
A6V11562455_en--_b