Managing Application Settings - Siemens RDS110.R User Manual

6
Operating the thermostat on the device
Advanced settings

6.8.2 Managing application settings

Multi-functional inputs
28 | 59
You can manage application settings by turning on/off a specific function or change
setting values. It is strongly recommended that only installers or experts with
detailed know-how about the thermostat modify the application settings.
NOTE:
●
Parameter availability depends on your selected application for your
thermostat.
●
Numbers marked in the above table are only for easy readability in this
document. They don't represent the parameter numbers in the local hardware
unit.
No. Application Descriptions
settings
1. Room Room temperature at
temperature 0 V of the 0-10 V input
1, 0 V value in terminal X1
2. Room Room temperature at
temperature 10 V of the 0-10 V
1, 10 V input in terminal X1
value
3. Room Room temperature at
temperature 0 V of the 0-10 V input
2, 0 V value in terminal X2
4. Room Room temperature at
temperature 10 V of the 0-10 V
2, 10 V input in terminal X2
value
5. Outside air Outside air
temperature temperature at 0 V of
, 0 V value the 0-10 V input
6. Outside air Outside air
temperature temperature at 10 V of
, 10 V value the 0-10 V input
7. Floor Floor temperature at
temperature 0 V of the 0-10 V input
1, 0 V value in terminal X1
8. Floor Floor temperature at
temperature 10 V of the 0-10 V
1, 10 V input in terminal X1
value
9. Floor Floor temperature at
temperature 0 V of the 0-10 V input
2, 0 V value in terminal X2
10. Floor Floor temperature at
temperature 10 V of the 0-10 V
2, 10 V input in terminal X2
value
Factory Range
settings
0 °C 0...50 °C
50 °C 0...50 °C
0 °C 0...50 °C
50 °C 0...50 °C
-50 °C -50...80 °C
80 °C -50...80 °C
-50 °C -50...80 °C
80 °C -50...80 °C
-50 °C -50...80 °C
80 °C -50...80 °C
A6V11562455_en--_b
Dependencies
A DC 0...10 V
external room
temperature
sensor must be
connected to
the thermostat
using terminal
X1.
A DC 0...10 V
external room
temperature
sensor must be
connected to
the thermostat
using terminal
X2.
A DC 0...10 V
external
outside air
temperature
sensor must be
connected.
A DC 0...10 V
external floor
temperature
sensor must be
connected
using terminal
X1.
A DC 0...10 V
external floor
temperature
sensor must be
connected
using terminal
X2.