Siemens RDS110.R User Manual page 50

9
Operating the thermostat with the mobile application
Scheduling options
50 | 59
when to turn the domestic hot water on or off. After you've finished setting your
schedule for one day, you can easily copy it to other days.
See Operating modes in a schedule [➙ 22] for more information about operating
modes.
To switch the thermostat to work following a schedule
●
From the Home screen of either the local hardware unit or the mobile
application, tap
To set time length for different operating modes
1. On the temperature control widget screen, tap
2. Select which day of the week you want to set schedules for. By default, the
system uses the current day.
3. On the vertical timeline, tap a specific time point to set a switching point. A
switching point marker displays beside the time point. If you want to fine tune
the switching point, drag the switching point marker to the desired time.
4. Tap the switching point marker, and then select "Comfort", "Economy" or
"Unoccupied" from the drop-down list.
5. Repeat Steps 3 and 4 to set other switching points.
NOTE: You can set a maximum of eight switching points per day. If you want to
delete one, tap on the switching point marker.
To set time length for the supply of domestic hot water
1. Verify that you have set the function to control the supply of domestic hot
water.
2. On the domestic hot water widget screen, tap
3. Select which day of the week you want to set schedules for. By default, the
system uses the current day.
4. On the vertical timeline, tap a specific time point to set a switching point. A
switching point marker displays beside the time point. If you want to fine tune
the switching point, drag the switching point marker to the desired time.
5. Tap the switching point marker, and then select "On" or "Off" from the drop-
down list.
6. Repeat Steps 3 and 4 to set other switching points.
NOTE: You can set a maximum of eight switching points per day. If you want to
delete one, tap on the switching point marker.
To copy one day's schedule to other days
1. On the temperature control or domestic hot water widget screen (if you've set
the function to control the domestic hot water supply), tap
2. Tap "Thermostat schedule" or "Hot water schedule" as desired.
3. Specify which day's schedule you want to copy from.
4. Tap "Copy", and then select which days you want to copy the schedule to.
5. Tap "Paste". The schedule is pasted.
if is not displayed on the screen.
> "Thermostat schedule".
> "Hot water schedule".
.
A6V11562455_en--_b