Replacing The Switch-Door Plunger - Samsung NX583G0VBSR Service Manual

3. Disassembly and Reassembly

3-8 Replacing the Switch-Door Plunger

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Switch-Door
Plunger
This document can not be used without Samsung's authorization.
Explanation Photo
SWITHCH-DOOR PLUNGER
20
Explanation
1. Turn off the electrical supply going
to the range .
2. Shut off the gas shut-off valve in
the gas supply line to the range .
3. Open the oven door .
4. Carefully pull out the switch door
plunger switch from the upper left
corner of the cavity front . Gently
grasp the plunger with pliers
and work from side to side while
pulling . Pull out far enough to
expose the wires .
5. Note the location and mark the
wires; then disconnect the wire to
the switch door plunger .
6. Replace with the switch-door
plunger, reconnect the wires
in their original positions, and
reinstall switch in the oven frame .