Samsung NX583G0VBSR Service Manual page 36

4. Troubleshooting
4-1 Failure Display Codes
Oven sensor error
Failure code
E-27
E-28
This document can not be used without Samsung's authorization.
CAUSE
Oven Sensor Opened
(Over 2950Ω)
Oven Sensor Shorted
(Under 930Ω)
36
SOLUTION
1) Disconnect electrical Power to the range.
Remove
The upper rear cover panel.
Measure the sensor resistance:1080Ω at
the room Temperature → If there are any
problems, replace the oven temperature
sensor.
2) If there is not any problem with oven
temperature sensor, Please check whether
there is a damaged terminal or wire on
harness.
3) Disconnect the oven sensor connector from
the PCB . Check resistance of oven sensor
connector on PCB(Normal:2850Ω)
CN401