Removing The Valve Cooktop - Samsung NX583G0VBSR Service Manual

3. Disassembly and Reassembly

3-5 Removing the Valve Cooktop

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Switch
Ignition
Fitting (Gas
line)
Valve
Cooktop
This document can not be used without Samsung's authorization.
Explanation Photo
SWITCH IGNITION
FITTING (GAS LINE)
ASSY VALVE-MANIFOLD
COATING
16
Explanation
1. Turn off the electrical supply going
to the range .
2. Shut off the gas shut-off valve in
the gas supply line to the range .
3. Remove the ASSY FRAME
COOKTOP, knob and the chassis
manifold panel .
4. Place a finger behind each side
of the switch ignition and pull it
straight out to release it from the
control shaft . Repeat for each
switch .
5. Using a tubing wrench and a
channel-lock wrench, disconnect
the gas lines from the valve
cooktop . Do not bend or crimp gas
lines during removal .
6. Remove 2 screws from ASSY
VALVE-MANIFOLD COATING
Note : When assembling and
disassembling the valve, the
torque should be 1 .5N .m .
7. Remove the valve cooktop .