Removing And Replacing The Door - Samsung NX583G0VBSR Service Manual

3. Disassembly and Reassembly

3-12 Removing and Replacing the Door

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Door
(Replace)
Door
(Removal)
This document can not be used without Samsung's authorization.
Explanation Photo
24
Explanation
1. Fully open the door
2. Pull the hinge locks downward
3. Firmly grasp both side of the door
at the top .
4. Close door to the door removal
position, which is approximately 5
degrees . Lift door up and out until
the hinge arm are clear of the slot .
1. Firmly grasp both sides of the door
at the top position .
2. Fully open the door . (If the door
will not fully open, it means that
the indentation is not seated
correctly in the bottom edge of the
slot . Push the hinge locks up to the
locked position .)
3. Close the oven door .