Replacing The Assy Door Latch - Samsung NX583G0VBSR Service Manual

3. Disassembly and Reassembly

3-7 Replacing the Assy Door Latch

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Assy Tube-
ASSY BRACKET-B URNER BOX
Manifold
Assy Door
Latch
Bracket-Latch sub
This document can not be used without Samsung's authorization.
Explanation Photo
ASSY Door Latch
19
Explanation
1. Turn off the electrical supply going to
the range .
2. Shut off the gas shut-off valve in the
gas supply line to the range .
3. Remove the oven door and the
cooktop .
4. Remove the control knob and the
chassis manifold panel .
5. Remove the ASSY tube-manifold using
a tubing wrench .
6. Remove 2 screws from the Bracket-
Latch sub to the rear of the range .
7. Disconnect wires of the door latch to
the rear of the range and remove it .
8. Remove 2 screws holding the Assy
bracket-latch rear to the rear of the
range .
9. Remove the latch-rod from the Assy
bracket-latch front .
10. Remove 2 screws holding the Assy
bracket-latch front to the front of cavity .
11. Reverse the order to install the ASSY
DOOR LATCH .
12. Test the ASSY DOOR LATCH to
make sure it is latching and unlatching
properly .