Replacing The Burner Cup - Samsung NX583G0VBSR Service Manual

3. Disassembly and Reassembly

3-6 Replacing the Burner Cup

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Locking Clip
& Electrode
Injector
This document can not be used without Samsung's authorization.
Explanation Photo
TUBE
BURNER CUP
LOCKING CLIP
1. Turn off the electrical supply going
to the range .
2. Shut off the gas shut-off valve in
the gas supply line to the range .
3. Remove the frame cooktop .
4. Using a tubing wrench on the
gas line fitting and a channel lock
wrench on the burner cup base,
firmly hold the cup base in place
while disconnecting the gas line .
5. To remove the electrode from
ELECTRODE
the cup, squeeze the two outside
edges of the clip under the
electrode together while pulling to
remove the locking clip . Slide the
electrode and the wire from the
cup . The burner cup can now be
removed .
17
Explanation