Replacing The Switch-Door Plunger - Samsung NX58H5650WS Service Manual

3. Disassembly and Reassembly

3-7 Replacing the Switch-Door Plunger

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Switch-Door
Plunger
SWITHCH-DOOR PLUNGER
19
1. Turn off the electrical supply going
to the range.
2. Shut off the gas shut-off valve in
the gas supply line to the range.
3. Open the oven door.
4. Carefully pull out the switch door
plunger switch from the upper left
corner of the cavity front. Gently
grasp the plunger with pliers
and work from side to side while
pulling. Pull out far enough to
5. Note the location and mark the
wires; then disconnect the wire to
the switch door plunger.
6. Replace with the switch-door
plunger, reconnect the wires
in their original positions, and
reinstall switch in the oven frame.