Removing The Rear Cover Panels - Samsung NX583G0VBSR Service Manual

3. Disassembly and Reassembly

3-2 Removing the Rear Cover Panels

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Cover-Wire LT/
RT
Cover-Back
Guard Wire
Cover-
Convection
This document can not be used without Samsung's authorization.
Explanation Photo
Cover-Wire LT Cover-Wire RT
Cover-Back Guard Wire
Cover-Convection
12
Explanation
1. Turn off the electrical supply
going to the range .
2. Shut off the gas shut-off valve
in the gas supply line to the
range .
3. Pull the range away from the
wall so that you can access the
rear panel .
4. Remove 2 screws at the Cover
Wire LT/RT and pull out the
cover
5. Remove 2screws at the cover
and pull out the cover from the
upper back of the range
6. Remove 3screws at the cover
and pull out the cover from the
range .